{"title":"Fine Pigments for Screen Printing, Airbrush \u0026 3D Printing","description":"\u003cp\u003eParticularly fine particle sizes for nozzles, screens and thin layers.\u003c\/p\u003e","products":[{"product_id":"feinpigment-natur-gruen-5-15um-100g","title":"Fine Glow Pigment Natural Green 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eNatural Green:\u003c\/strong\u003e whitish by day; in the dark the pigment glows green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Natural Green – whitish by day, glows green. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Natural Green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232670282112,"sku":"pigment-nature-green-100g-15um","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-natur-gruen-5-15um-100g_f64f8dc6-5dc0-4c3f-b9f0-3c204b094c48.jpg?v=1793116582"},{"product_id":"feinpigment-terracotta-5-15um-100g","title":"Fine Glow Pigment Terracotta 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eTerracotta:\u003c\/strong\u003e brownish by day; in the dark the pigment glows green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Terracotta – brownish by day, glows green. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Terracotta in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232670773632,"sku":"pigment-terracotta-green-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-terracotta-5-15um-100g_d8e3ac07-3daa-4291-a263-cf31b031e8a8.jpg?v=1793116588"},{"product_id":"feinpigment-lila-blau-5-15um-100g","title":"Fine Glow Pigment Purple-Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003ePurple-Blue:\u003c\/strong\u003e purple by day; in the dark the pigment glows blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Purple-Blue – purple by day, glows blue. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Purple-Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232671625600,"sku":"pigment-purple-blue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-lila-blau-5-15um-100g_df360a9a-451c-463b-9d5a-41d4c9e748ba.jpg?v=1793116594"},{"product_id":"feinpigment-blau-blau-5-15um-100g","title":"Fine Glow Pigment Blue-Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eBlue-Blue:\u003c\/strong\u003e blue by day; in the dark the pigment glows blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Blue-Blue – blue by day, glows blue. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Blue-Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232674574720,"sku":"pigment-blue-blue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-blau-blau-5-15um-100g_154d7e14-caab-417a-8267-12ec201214cd.jpg?v=1793116600"},{"product_id":"feinpigment-gelb-gruen-5-15um-100g","title":"Fine Glow Pigment Yellow-Green 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eYellow-Green:\u003c\/strong\u003e yellow by day; in the dark the pigment glows yellow-green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow-Green – yellow by day, glows yellow-green. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Yellow-Green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232675393920,"sku":"pigment-yellow-green-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-gelb-gruen-5-15um-100g_dc335bda-a083-4512-91bd-c082758a46af.jpg?v=1793116606"},{"product_id":"feinpigment-natur-blau-5-15um-100g","title":"Fine Glow Pigment Natural Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eNatural Blue:\u003c\/strong\u003e whitish by day; in the dark the pigment glows blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Natural Blue – whitish by day, glows blue. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Natural Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232676639104,"sku":"pigment-nature-blue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-natur-blau-5-15um-100g_1d1ce0fa-592b-415f-a6a8-0dcf621dae53.jpg?v=1793116613"},{"product_id":"feinpigment-natur-gruenblau-5-15um-100g","title":"Fine Glow Pigment Natural Green-Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eNatural Green-Blue:\u003c\/strong\u003e whitish by day; in the dark the pigment glows green-blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Natural Green-Blue – whitish by day, glows green-blue. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Natural Green-Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232678441344,"sku":"pigment-nature-greenblue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-natur-gruenblau-5-15um-100g_36ce0ac3-0896-45bf-a497-15cd5f2b579f.jpg?v=1793116619"},{"product_id":"feinpigment-gruen-gruen-5-15um-100g","title":"Fine Glow Pigment Green-Green 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eGreen-Green:\u003c\/strong\u003e green by day; in the dark the pigment glows green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Green-Green – green by day, glows green. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Green-Green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232678867328,"sku":"pigment-green-green-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-gruen-gruen-5-15um-100g_a7e44bb9-45dc-4d53-8ae2-a53db2ee789b.jpg?v=1793116626"},{"product_id":"feinpigment-orange-orange-5-15um-100g","title":"Fine Glow Pigment Orange-Orange 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eOrange-Orange:\u003c\/strong\u003e orange by day; in the dark the pigment glows orange.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange-Orange – orange by day, glows orange. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Orange-Orange in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232679227776,"sku":"pigment-orange-orange-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-orange-orange-5-15um-100g_4b7bc7ca-82a2-4d2a-96fe-661d067d18ea.jpg?v=1793116632"},{"product_id":"feinpigment-rot-rot-5-15um-100g","title":"Fine Glow Pigment Red-Red 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eRed-Red:\u003c\/strong\u003e light red by day; in the dark the pigment glows reddish.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Red-Red – light red by day, glows reddish. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Red-Red in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232679653760,"sku":"pigment-red-red-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-rot-rot-5-15um-100g_66400fa6-f45c-460b-b27b-817c4b1fbbae.jpg?v=1793116638"},{"product_id":"feinpigment-pink-pink-5-15um-100g","title":"Fine Glow Pigment Pink-Pink 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003ePink-Pink:\u003c\/strong\u003e pink by day; in the dark the pigment glows pink.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Pink-Pink – pink by day, glows pink. You will find all 11 colours under \u003ca href=\"\/en\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Pink-Pink in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232680440192,"sku":"pigment-pink-pink-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-pink-pink-5-15um-100g_c77f36a3-f45a-4e31-a54e-fac2ae91950e.jpg?v=1793116644"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/collections\/pigmente-blau-blau-0.png?v=1793094899","url":"https:\/\/lumentics.de\/en\/collections\/feinpigmente.oembed","provider":"lumentics","version":"1.0","type":"link"}